EcoSet MS Adhesive (3 in 1)
EcoSet MS Adhesive (3 in 1)
  • Load image into Gallery viewer, EcoSet MS Adhesive (3 in 1)
  • Load image into Gallery viewer, EcoSet MS Adhesive (3 in 1)

EcoSet MS Adhesive (3 in 1)

Regular price
$137.50
Sale price
$137.50
Regular price
Sold out
Unit price
per 

MS Adhesive is a high performance, one component MS Polymer adhesive for surface bonding all Timber flooring. It can be used for bonding all types of Timber flooring including Parquetry, engineered, laminated and solid timber plank/strip flooring to concrete, cementitious substrate and smoothing compounds. Excellent UV Stabilisation and Beading qualities. MS Adhesive is suitable for use with floor heating system installations.

Advantages & Benefits

Fast Curing - EcoSet can take foot traffic after 6-8 hours and Solid Floors can be sanded after 48 hours.
No Carcinogens - Carcinogens are any substances capable of causing cancer in living tissue. Unlike Polyurethanes that contain carcinogens and are suspected of causing cancer,
Built in Moisture Barrier - EcoSet has no ingredients that cause cancer or respiratory ailments. Tested to ASTME96 at only 1.5mm thick, EcoSet has a built in Moisture Barrier. It is important to ensure that full coverage of the slab is achieved.
Acoustic Properties - EcoSet has been tested in Australia by Renzo Tonin & Associates. EcoSet meets The National Construction Code (NCC) 2019 and The City of Sydney Council's Development Control Plan (DCP) 2012, just to name a few.
Highly Flexible - EcoSet is flexible allowing the natural movement of the floor without breaking the adhesion.
Great Beading Stability - Using a Floor Essentials B3 trowel over a flat surface will allow the perfect beading stability to ensure your floor will adhere.
Easy Clean Up - EcoSet wipes off both the finished floor and your skin extremely easy. Just dab a small amount of Methylated Spirits on the adhesive, a light rub and it is gone.
Suitable for Underfloor Heating - Simply switch off under floor heating 48 hours before laying the floor and leave off for 48 hours after completing the floor. The adhesive will not be affected by the heating system.